Search results

With the slot of the rubber disk of the jack just centered on each of the 4 protrusions that the car has below. Just they do in the workshops to raise the entire car. If the lifting jack does not have that disk, then you should get one as Verminator says

Beware of quick repair shops that offer cheap A/C recharging. Last year I took my car to one of these places, they don't do a complete test, they recharged it and the A/C continued to cool poorly. Finally I took it to a specialized A/C workshop and they found a leak in the condenser They found...

The tire touches the ground in a slightly different area depending on whether it goes straight, turns, brakes or accelerates. Balancing machines have a cap that covers the wheel when it rotates. It may be that the out-of-roundness has gone unnoticed. And if you already had vibration with the...

Well, probably one of the tires has some deformity or has not been well mounted, well placed on the rim all around the edge. To avoid this, they usually put soapy water in the edge. Just because it's well balanced with weights doesn't mean it turns perfectly round

Well, it's better to disassemble the entire turbo and manifold and repair that leak. Turbos can be rebuilt, in many cases it is not necessary to change it for a new one. The fact that there is oil in the exhaust is dangerous, since that area reaches high temperatures and there is a risk of fire.

I changed the oil in January with Total Quartz 9000 5w40, now it has been 3000 km since then, before I had Total Ineo 5W30. Oil consumption has been greatly reduced, before it drank approx. 1 liter /3000 km, now less than half. And the most remarkable thing is that the engine makes less...

Mine also have some small bite on the border and that cannot be fixed by grinding and painting, you have to add aluminum with welding. It is also necessary to verify that the rim rotates perfectly round, especially the inner ring, if it has hit potholes or curbs it may have been deformed, this...

Try disconnecting the battery, wait 1 minute and reconnect it. This once fixed the navigation that stopped working in my car. Leave a door open when you do it.

The RCZ on origin, never came out with a stereo with WiFi. What you have for sure was installed later, it is not original equipment.

The original optional Sortilege rims for RCZ for 235/40 19 tire https://eshop-peugeot.cz/gb/rcz/815-aluminum-wheel-sortilege-19-rcz.html?SubmitCurrency=1&id_currency=8

Possible Cause: Carbon buildup on intake valves which should also cause a rough idle. It would also be nice to check the compression of each cylinder.

If your car consumes so much what you have to look for and repair the fault that causes it and not to optimize the engine map. My 156HP consumes around 6.5l/100km at 120km/h and surely at 100km/h it would consume less than 6

If the problem is that you have fault P2263, before changing the solenoid valve, you should clean a small filter hidden behind the rocker cover. It happened to me that they changed the solenoid valve but the fault continued to appear until I discovered and cleaned that filter. In order to...

That could be done in older cars without so much electronics, when the membrane of the wastegate actuator was simply connected to the intake manifold. Now by doing that the system detects that the pressure is not as expected, the engine fault light comes on and it goes into limb mode. If you...

The maximum turbo pressure is stored in the ECU maps and does not have to be just one pressure, it varies with revs or other factors. It's not as easy as changing a single value.

I am in a similar situation, some days it starts fine, others it takes about a minute to idle smoothly, with misfiring and a bad exhaust smell. If I try to drive like this, the famous fault P0087 fires. The problem is undoubtedly the HPFP, I have observed the pressure with the Torque app...

I use the Torque app, with the free version you can delete the fault codes, with a cheap Bluetooth ELM327 connector

No, each wheel has a slotted disc behind the brake disc and a sensor that detects if a wheel has locked up while braking or slipping while accelerating, essential information for ABS or ASR systems to work. If one of the sensors fails the ABS light also comes on but changing it is far cheaper...

Have the wheel rotation sensors been checked ?

If, apart from the misfire error codes, the famous P0087 code also occasionally appears, then the problem is in the HPFP.