Search results

Mine also have some small bite on the border and that cannot be fixed by grinding and painting, you have to add aluminum with welding. It is also necessary to verify that the rim rotates perfectly round, especially the inner ring, if it has hit potholes or curbs it may have been deformed, this...

Try disconnecting the battery, wait 1 minute and reconnect it. This once fixed the navigation that stopped working in my car. Leave a door open when you do it.

The RCZ on origin, never came out with a stereo with WiFi. What you have for sure was installed later, it is not original equipment.

The original optional Sortilege rims for RCZ for 235/40 19 tire https://eshop-peugeot.cz/gb/rcz/815-aluminum-wheel-sortilege-19-rcz.html?SubmitCurrency=1&id_currency=8

Possible Cause: Carbon buildup on intake valves which should also cause a rough idle. It would also be nice to check the compression of each cylinder.

If your car consumes so much what you have to look for and repair the fault that causes it and not to optimize the engine map. My 156HP consumes around 6.5l/100km at 120km/h and surely at 100km/h it would consume less than 6

If the problem is that you have fault P2263, before changing the solenoid valve, you should clean a small filter hidden behind the rocker cover. It happened to me that they changed the solenoid valve but the fault continued to appear until I discovered and cleaned that filter. In order to...

That could be done in older cars without so much electronics, when the membrane of the wastegate actuator was simply connected to the intake manifold. Now by doing that the system detects that the pressure is not as expected, the engine fault light comes on and it goes into limb mode. If you...

The maximum turbo pressure is stored in the ECU maps and does not have to be just one pressure, it varies with revs or other factors. It's not as easy as changing a single value.

I am in a similar situation, some days it starts fine, others it takes about a minute to idle smoothly, with misfiring and a bad exhaust smell. If I try to drive like this, the famous fault P0087 fires. The problem is undoubtedly the HPFP, I have observed the pressure with the Torque app...

I use the Torque app, with the free version you can delete the fault codes, with a cheap Bluetooth ELM327 connector

No, each wheel has a slotted disc behind the brake disc and a sensor that detects if a wheel has locked up while braking or slipping while accelerating, essential information for ABS or ASR systems to work. If one of the sensors fails the ABS light also comes on but changing it is far cheaper...

Have the wheel rotation sensors been checked ?

If, apart from the misfire error codes, the famous P0087 code also occasionally appears, then the problem is in the HPFP.

Disconnect the battery, wait a minute and reconnect it. The only thing that is lost is the date- time setting

KDL is the color code

My RCZ is a car that I like, it is a car with personality, with beautiful and distinctive shapes, not like current new cars, apart from being ugly, they all look alike. I am willing to keep it for a few years in good and original condition, even if it costs some money, because that way in the...

The washer was and is positioned superimposed as in your left drawing although its outer diameter is much smaller. Attached photo of the old tensioner with washer. As I said before there was no other washer on the engine block. I just took out a tensioner with its washer and put a new one with...

I already changed the tensioner 5 days ago. It took me about 45 minutes with an assistant friend. I open the intermediate joint on the pipe from the intercooler to the intake manifold and loosened the clamp on the manifold side blindly with a small ratchet wrench. So you can rotate the pipe...

Petrol RCZs do not originally have acoustic insulation on the bonnet. Also if it were insulated the motor would run even hotter. The risk of fire is increased in any turbocharged engine, in no case is it exclusive to the RCZ