GUIDE: Updating the firmware, maps and installing risk areas (RADARs) on NG4

[RCZ-Fan]

Just tried reinstalling the firmware files and it has made no difference to the screen software version. It is still showing as invalid. However, "the plot thickens". (English phrase). Map locations are no longer showing full UK post codes. They are only showing the the first half of the postcode and the first number of the second half (example "S8 8XZ" is only selectable as "S8 8"). This is something which use to exist when I first got the car back in 2012. I will reload the Maps USB and hopefully this will fix this problem.

As to telephone numbers imported on to the unit from my iPhone, I do notice they are imported with blanks between country code, prefix and actual number (e.g. +44 0777 123456). Yet if you add a number manually to the address book of the NG4 you are not allowed to add spaces. ( i'm going to play with this and see if updating the address book manually to not have spaces will fix the problem.

Thank you for your assistance so far.

Naja, bei mir wird die Version auch als "not aviable" angezeigt.

Aber das hat keinen Einfluss auf die KArten oder andere Dinge

 

[RCZ-Fan]

..for my RCZ Fan Group

best wishes to all

 

[juzernejm]

Hi everyone, I’m new to the forum and I hope someone can help me.


I have a Peugeot 3008 with the NG4 navigation system (firmware NG4_D_N42c_N42.03), and after installing the new maps I keep getting the message “Installation in process” constantly.
The update finished normally and the navigation opened, but the message keeps appearing all the time, even though the USB stick has been removed.


I also tried inserting the same USB again and reinstalling the update, but the result is the same — it still keeps showing “Installation in process.”


Has anyone experienced this issue or knows how to fix it?
Thanks in advance!

 

[RCZ-Fan]

Hi everyone, I’m new to the forum and I hope someone can help me.


I have a Peugeot 3008 with the NG4 navigation system (firmware NG4_D_N42c_N42.03), and after installing the new maps I keep getting the message “Installation in process” constantly.
The update finished normally and the navigation opened, but the message keeps appearing all the time, even though the USB stick has been removed.


I also tried inserting the same USB again and reinstalling the update, but the result is the same — it still keeps showing “Installation in process.”


Has anyone experienced this issue or knows how to fix it?
Thanks in advance!

1. System neustarten beziehungsweise auf "Auslieferungszustand" zurücksetzen
2. Installation neu durchlaufen lassen.


Ich hatte das Problem auch mal, ich habe dan mein system neu installiert, dann war dieses Problem gelöst.

Hoffe ich konnte helfen und es führt bei Dir zum Erfolg.

Lieben Gruß

Tristan