Search results

Be very careful that the basin spanner does not fly off. The amount of damage that can be done is frightening. You can buy individual sockets from any Halfords.

I added a lighter socket inside the glovebox (tapped into the existing socket). I use it to power the dashcam (the cable is tucked behind the headlining and behind the A pillar trim. I needed to take the Glovebox out to do the install, but its a simple job and no wires are visible.

I think I will have a go at fixing mine..... As you say - if it fails I can always take it to a professional. Thanks for posting the pic's.

Can you post a few photo's. I would be interested to see how it came out.

This is a shameless copy from the Peugeot Service box, Have a read and see if it helps.

It might be worth connecting a reader to the diagnostic socket. Any of the Control Units with probably throw an error code.

Also useful if you leave your pet Bee in the car.

It turns off the internal movement sensors when the alarm is activated. Search "Locking the vehicle with exterior perimeter monitoring only" in the handbook.

Try here.... https://www.onlymanuals.com/peugeot/rcz

Here you go.....

I had a look at ServiceBox..... At the very least the Rocker cover needs to come off, Maybe lots more. There is a part number for it, but as Neil has stated - its most likely to be part of a kit and not a simple job.

Good news that its a quick fix. I bet a replacement pipe would cost a fortune.

I have always added a tube of Molyslip to a gearbox whenever I acquired a new car or changed the Gearbox oil. Best £10 ever spent.

I like those stripes.....

Just adding to OkeyStokey's post, The following instructions are shown in ServiceBox for removing the boot switch/button.... Pic 1 - Remove the cover (1) ; Using tool [1350-ZZ]. Pic 2 - Remove : The switch (3) ; Using tool [1350-ZZ] The springs (2) Pic 3 - Unclip : The boot opening control...

Looks like the light unit is just pushed in and held in place by clips. ..as the bumper is made of plastic, there will be at least 2 wires, negative and a feed from the lighting circuit. The camera (unless its a wireless camera) will probably have a phono connection, and this will need to go...

I'm 6' 1". Headroom is not an issue but with longer legs I needed to raise the front of the drivers seat, I put a 30mm spacer under each of the front seat mounting bolts, It works fine.

No experience of this product, but some questions you may want to ask.... Will the Parking sensors still work with this? Will the Steering column switch still work? Have a good search through this forum for "double din", Many of us have installed aftermarket units, with varying levels of...

I wouldn't mind seeing some pictures of the wrap, I'm getting the wheels on my Opal White RCZ refurbished (and painted black) and was thinking about getting the arches painted (or wrapped) as well.

Does this help....