RCZash
Active Member
- Joined
- Sep 10, 2013
- Messages
- 562
- Reaction score
- 70
- Points
- 28
Fitting them is not to hard. Remove the fabric on the boot lid (plastic pop out screws and 2 normal screws) Mine were Torx screws. - pop up the spoiler from the button inside the car - remove the 2 nuts holding the lamp in place from the underside of the lid - using thin nose pliers, squeeze the 2 metal clips also holding the lamp in place to pop it out - remove the plug on the lamp - follow in reverse to refit. Hope this helps :