Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Just a thought for a temporary fix. Could you swap the left motor over? If the drivers side works, you now know it is just a motor. Plus you can use the drivers side normally, keeping the passenger side closed until fixed at a later date?
Im sure I have read about others fitting wheel spacers (maybe 25mm)? so the 10mm wider tyres should be less of a problem if there was one. Although spacers would only affect clearance on the outside edge to be fair.
I never replaced the sensor after all.
It was happening during the heatwave, so A/C was switched on, however, there was no refrigerant (since refilled it myself). I havent seen any fluctuations since.
Not sure whether it was coincidental or well known, but maybe hot weather, no (or low)...
Hi guys,
Anybody know what the correct part number is for a water temperature sensor THP200 2015? I have seen 1338 mentioned but the last letters seem to make a difference.
I have found this part on eBay (item # 254321738412) which is a 1338C1 / 1338.C1. Seems to match on their vehicle check...
The arches are a common issue, and there are many posts about it. My personal view is there are 2 conditions.
1. Surface watermarks which are easily removed with the bumper gel. Or like in my experience.
2. The corrosion is under the protective coating. no amount of wiping or rubbing with any...
I havent had any clearance problems. 235's are 671mm diameter, 245's are 679mm diameter so only 8mm larger. Not noticed any handling differences either. I guess you would have to be at the edge of grip to notice though?
The 10mm wider doesnt seem to have pushed it much closer to the arches...
I have just had Pirelli P zero fitted to 2 rears.
I have opted for 245/40/19 though. You get slightly more optins in that size, and only around 1% different from original (so within safety margins).
The dent looks like it could be repaired via "induction paintless dent repair", but I have no experience of those systems, only seen on wheeler dealers a while back. A quick search shows people still offer that service though?
Making a pure guess I would say this is firmware programmed due to whatever their latest revision was at time of programming (it may even be related to which market it is aimed at)? I noticed yours has a boxed area in the top left that mine doesnt have. If it is just a revision difference, I...
Mine has the indicator on all 4 screens as you can see in the pic. Small font in the upper right. The "blank" screen shows nothing but the upper horizontal line and the indicator, same size, same position.. THP200 on 15 plate. I cant help with your question about changing it though. Just seems...
Could there be a crack or hole in the plastic somewhere around that hole? It definitely seems to be just a bolt hole. 1st pic is a different engine to yours but shows the bolts (just above the oil cap I guess)? 2nd pic is one I took of mine (200 THP) there is a bit of oil there which is making...
They look like regular "socket button" screws to me. Being European it is most likely a metric size. If you can remove one you could measure the diameter and length to get an idea. length is measured from the underside of the dome to the tip. Diameter could be anything from 3mm, 4mm, 5mm, 6mm...