Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Hi all,
hope someone can help?
As you can see from the photo, my 19" rim now has crack in it, thanks pot hole, stays up for about a day, and use the car every day so have to keep pumping up.
As I don't have a spare I would like to get repaired, as you can my wheels are in great condition,
So my...
Love the car, hate the engine,
Had the engine warning light come on again, plugged in my Carly device, came up with P0087, High pressure fuel circuit, pressure too low, and P1062, Variable valve lift system.
So, had a new high and low pressure fuel pumps changed 2yrs ago (20k) the high pressure...
Thanks for the info, will need to do over one weekend as my only car and will need for work, I did watch that guy on YouTube do it, he rolled the clip towa bulk head and not pull straight up.
i have the workshop manual and looks like some of the hose clips are the crimp type and will need...
Hi, looks like an amazing trip,
I have a question? Do get leg ache on such long trips? I find the seat base not long enough to support my legs, and after a couple of hours driving, I have to keep moving my legs around 😞
Still want to drive to Monza F1 track and then Milan
Hi and welcome,
Was a Ford guy for ever, but the style of these is amazing, got a 13 plate THP200 with 65k on her,
Do all services my self, need to do water cross over pipe next, common fault with plastic parts,
Good tyres make a difference too
One of the first things I upgraded was head unit...
Hi, and welcome, had my THP 200 for a couple of years now, head unit change was one of my first things I changed, I fitted the attached with surround that used original buttons across the top, and correct cable with cambus to use old stalks and can set all info setting on small display on top of...
Hi, and well done with the THP, ref the air in the system, there is a bleed screw on top of the thermostat housing, could be worth a go?
always like a clean bay 😁
hi from Essex,
Don't know if you have since got one, but I am 57 and got a 2013 THP 200 in Mercury Grey, more than happy to meet up and show you round one?
Let me know.
Hi and welcome to club,
I was the same, I was Ford all my life, but then the style just got me hooked, I also did the double din head unit with car play, also got the wiring to still use the stalks on the steering column, run the usb cable out under the ash tray.
Enjoy the car
Hi,
resistor was Amazon,
all the other faults were from the fan issue, so had to replaced, the guy on the isle of white even spoke to Bosch about a wiring diagram for the ecu but they said sorry we don't have any info on the ecu any more.
Hi all,
so, she's back, finally,
The fix was so much harder as my mechanic could not find a wiring diagram, so after getting the cloned ECU fitted to the car, still would not work??
This still kept throwing up codes, so started to unplug loads of sensors, and then he remembered that one of...
Hi,
so have bought a 2nd ECU, that is now on the isle of white getting my cars info cloned to it, should be back next week, get connected and all good.
fingers crossed.
Hi all,
update time, car still in garage, my guy has replaced the VVT solenoid, re-set the VVT adjuster, but still would not start, he then spoke to an electronics engineer, who said he had had this one before, when the the VVT solenoid failed it it blew a resistor in the ECU,
So, he sent my...
So, it looks like I need a new variable valve actuator, as you can see from attache, the notched cam should back against the pin, my guy is unable to make it move, it’s part 16 on the attached
has anyone got a thp200 engine they are breaking?
thanks
Hi,
so, after talking to my guy, and taking pictures, he has found the issue but not the solution, the motor that adjusts the VVT on the inlet Cam, is not getting power, if you look at the image, that shaft sitting above the notched gear should be in that cut out when in normal position,
Does...