Search results

“Fragile”?? Don’t be fooled by all the 156 knockers there’s plenty of 200’s and R’s that have had had the common timing chain issues, there were over twice as many 156’s over 200’s manufactured so your always going to get more 156 owners reporting problems.

Yep you’ve got it 😱 if it sounds like that get it sorted before you wreck the motor as Pedro said you could just try the tensioner but many have found the guides to be broken upon strip down.

I don’t think Alcon made any revised discs for the R, the common complaint from owners were that they were squealing which I’ve heard is common on race spec brakes, but don’t quote me on that 😉 I think when R owners found out that Peugeot would replace R discs under warranty most owners wanted a...

Is it a 2020 update?

The lion does come off it’s just double sided tape plus some locating tabs. Use fishing line or similar to cut away at the old tape to remove them either mask off and spray or vinyl wrap 👍

Peugeot actually offered two options of carbon roof one high gloss the other matte As Verminator said my launch edition came as standard with the high gloss version, the option on other models would have set you back £1300!

🤔 hopefully the creases will fall out, as long as your happy with them for the money I don’t think they look bad. 👍

“Free check” not that old chestnut 🤣🤣

Great shots there 👏👏👍

Castle Combe race circuit

I bought mine from these guys it were around £170-£180 delivered

You need 5 x 108, 65.1 wheel bore and 65.1 hub centric. I’m not sure about the thread length as I have aftermarket alloys with a tapered seat where if your using standard alloys you need the flat seat type bolts your probably looking at 50mm thread length 75mm total bolt.

A few more photos

One of only a few car events to happen this year today’s Forge action day was a real success many truly stunning cars there and our little group of RCZ’s drew plenty of attention from the event attendees. Here’s a few photos of our group. Don’t worry if you missed out there will be plenty more...

Just a little ride out to blow away the cobwebs 😊

Me and the Verminator nearly bought this car between us because it was so rare 😂

Remove all plastic studs by levering out the internal to release the stud if I remember I think there are about 16 then remove the two torx screws hidden in the hand pulls see photos remove the two nuts for the light fitting these are the outer ones disconnect light connection, there are two...

We would have to see how many members would be interested do you have any links to each manufacturer and their kit? I’ve seen the Ksport kit which looks super another is pug1off they’re probably cheaper and better quality.

Looks a good job to me 👍