Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Tense the springs of the battery contacts a little and clean the contact areas with alcohol and no longer touch them with your fingers.
The electrical connection of that battery is usually problematic.
In the maintenance book of my 2010 THP 156HP, in the recommended oils, the graphic on the left suggests that more viscous oils can be used in warmer climates.
Here the thermometer almost never drops below 0C.
In the next oil change I will put 5W40, I hope that the oil consumption will be...
Without knowing the fault codes, little can be said.
You can buy an ODB II connector with bluetooth and and with a mobile free application like Torque you can see the codes.
Also erase them so the light turns off.
All cars sold from September 2015 in the EU had to comply with Euro 6, both diesel and gasoline.
The last RCZ produced were manufactured in September 2015. Perhaps they stopped production for not complying with Euro 6?
Try cleaning the two pressure sensors.
One is between the intercooler and the throttle body, very easy to remove.
The other one is in the intake manifold, to access it you have to remove the air filter box.
They can be cleaned with a contact cleaner spray.
Exactly, hotter means less mass of air, plus that closed curve in the intake and that complicated path to reach the entrance of the red tube makes the passage of air even more difficult.
That air intake is definitely worse than the original one.
For me, the first thing you have to do is go to another mechanical garage, one that has the means to analyze the problem,
What fault codes did the engine fault light come on?
Now your mechanic thinks the problem is the catalytic converter, almost certainly he will remove it and the problem...
ERG or EGR , as far as I know prince engine doesn't have exhaust gas recirculation.
That SA459 seems to be a spray, where is it introduced into the engine?
SOLVED !!
The problem was in the light below the right door.
The bulb had moved, crossed, and was shorting circuit.
The previous owner changed all the interior bulbs to LEDs.
I will put the incandescent ones back on, I prefer warm light instead of white, it is more pleasant.
The buzzing noise...
Thanks Pedro,
Well, if the power supply fails, the problem will be in the BSI module. From there come the cables that go to the ceiling lamps.
The ceiling lamps module only has bulbs, switches and a LED diode with a resistor, it does not have electronics.
Today I'll look at cleaning the...
When opening the car, this light should come on progressively and later it also goes off gradually.
But now it won't turn on. When it should turn on or off instead there is a buzzing noise of about 2 seconds on the right door internals !!
I guess it's generated by the speaker, but it does it...