Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

Search results

  1. I

    EML on minutes after filling her up and fan is going crazy for 5-10 minutes after stopping

    My HPFP on its way to Mike to refurb. Hopefully, that will be it for a while, don't fancy some of the work you had done to yours yet 🤣
  2. I

    EML on minutes after filling her up and fan is going crazy for 5-10 minutes after stopping

    An update to this. I did reset the error code and the car was running fine after. In the end as I had already bought a set of coil packs and plugs I decided to go ahead and replaced them. I didn't notice it before when I swapped the coil packs around to see if the issue moved. However, when I...
  3. I

    silicone hose thp270

    It's not, just one for THP200. As far as I know, Flexeo as mentioned above are the only people doing that silicone pipe for RCZ R. Based on the email I got from them over the weekend, it seems to suggest some of those silicone hoses & hard pipe will be available for shipping from end of this month.
  4. I

    silicone hose thp270

    Ended up ordering Forge one. More expensive but as bought the other silicone hose set from them so decided to keep them from the same manufacturer. In saying that Forge have discontinued some of them. FYI, also bought additional silicone hose & polished metal pipe from Flexeo in France. Hoping...
  5. I

    Remapping an RCZ 200?

    I have a 2013 THP200 with 71k miles and now toying with the idea of remap. My plan is to have walnut blasting done and then a remap. Someone on one of the FB groups did a stage 1 remap with Dervtech in Manchester and he got, 241.6 bhp@6152rpm and 383.91nm@2818. My plan is to take mine to...
  6. I

    Red rcz caliper

    They have been repainted red. The R model has red calipers at the front for the Alcon discs & some like Magnetic model has black calipers.
  7. I

    Front & Rear Struts / shocks for GR 200

    Another thing if you replace top bearings, etc is that some people have noticed a small gap between the body and the top plate of the mounting front shock control cup. Someone mentioned 9675124280 would solve the issue, rather going for RCZ one. That part number is used by other PSA models which...
  8. I

    Front & Rear Struts / shocks for GR 200

    Below is a summary of what I found when researching this. Someone mentioned the OE struts are Sachs Bilstein OE replacement would be the B4 If you want slightly sportier upgrade without lowering then go with B6. One of the members in Australia went for B6 on his THP200 Someone suggested to...
  9. I

    RCZ vs. RCZ R weight reduction?

    I asked someone on the FB group who bought a set of second hand ones the other month & he said around 12.5 kg each.
  10. I

    Walnut Blast of inlet ports

    Thank you. I contacted a BMW and Mini specialist which is closer to me but unfortunately they can't do RCZ. Found SPT Tuning which seems to do a lot of DS3 but further than Burch Motor works. Now I am thinking if I am going to go all the way to all these places I might as well do a walnut blast...
  11. I

    Does RCZ R Torsen LSD fit on THP200

    FYI, if anyone is interested. I think I have the answer to this. RCZ R Torsen has 74 teeth and THP200 open diff has 68 teeth.
  12. I

    Walnut Blast of inlet ports

    Hi, could you please tell me where you had this done? Been trying to find a garage that can do this on RCZ.
  13. I

    Does RCZ R Torsen LSD fit on THP200

    Does anyone know if RCZ R Torsen LSD fit on THP200? I know Pug1Off have a couple which are not Torsen but wondering if Torsen one from RCZ R fits THP200. I think I have seen one post where someone put RCZ R gearbox on their THP200.
  14. I

    Blue Led Speedo Conversion

    Found the link on FB group. https://www.facebook.com/groups/363925530692737/user/1569667455 It does look good and make it look more modern. I think it might not be an RCZ though. I thought about giving a go myself but chicken out really quickly as there are a lot of LEDs to replace and it's...
  15. I

    Coolant leak from Thermostat Housing

    Correction. Had it done at a Peugeot independent specialist in London. Total labour for replacing and flushing the system was 1.8 hours. Part cost £106.84 Total cost £294.84 back in October 2021 for replacing thermostat housing. Mine is a 2013 THP200. Hope this helps. I did get them to do an...
  16. I

    Coolant leak from Thermostat Housing

    I need to check but think I paid around £330 last year & labour was 1.5-2 hours
  17. I

    EML on minutes after filling her up and fan is going crazy for 5-10 minutes after stopping

    Didn't realise Motorscotti did a video on replacing one.
  18. I

    EML on minutes after filling her up and fan is going crazy for 5-10 minutes after stopping

    Planning to use his service. Just need to find the time & work out how to get the hpfp off. Will go through the various posts on how to do it.
  19. I

    EML on minutes after filling her up and fan is going crazy for 5-10 minutes after stopping

    Update to this. I've not managed to drive the car that much. Since the issue occurred I probably only driven the car around 80-100 miles. Did around 40 miles on Fri and no engine fault, however, on Sat afternoon when I started the car EML came on. Hooked up my diagnostic and P0087 was there. I...
  20. I

    R for sale at auction

    I recognise this particular car and it was posted previously here or on the FB group but I can't seem to find it. From what I can remember it needed a lot of work doing on it and I guess the owner decided it was not worth his while. Agree with the various comments that this one might hide more...
Top