Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

Recent content by BobM

  1. BobM

    Delay/power lag?

    Hi Lee thanks for the reply. Yes but this is different I have had the car for a couple of years now and it never done this before. It’s like it does not move or rev at all just stay still. Maybe it’s an issue with the turbo but I hope not. Could be the clutch or gearbox I don’t have a clue to be...
  2. BobM

    Delay/power lag?

    Hi guys, I hope you are well. I’m having an issue with my 2010 Petrol RCZ. When I start the car it and go it takes a while for the car to move even if I put my foot fully down on the accelerator. The revs are not going up and the power is not coming? It’s like it takes 4 or five seconds before...
  3. BobM

    My windows won't close!

    Thank you very much.
  4. BobM

    My windows won't close!

    I am having this same issue. Does anyone know why? When I close the car and shut the door the window does not close. Did you ever find out what the issue was?
  5. BobM

    Fan on full blast when engine is cold?

    I have the 156 1.6l Petrol Engine. does it have the same issue?
  6. BobM

    Fan on full blast when engine is cold?

    Thanks for this.
  7. BobM

    Smoke & slight miss when warm - Help

    I think i need to get this done too. Thinking about getting all the gaskets seals done ETC. Something like the vid below. Do you think it is a good idea?
  8. BobM

    Fan on full blast when engine is cold?

    Mine still has an oil leak from somewhere and I think it needs the valve stem seals done too. Part of me wants to put it in and just get the whole thing done at once. Maybe get the rocker cover gasket done. Oil housing gaskets ETC. something like the vid linked below. What do you guys think?
  9. BobM

    Fan on full blast when engine is cold?

    just an update guys it has been running fine since. I also found a loose pipe in the engine it is one that goes from the triangle box at the front right of the engine bay to the very back underneath another pipe above it. It is held on with a clip that was not "clicked if you know what i mean
  10. BobM

    Locking wheel nut key

    I have lost mine too. Is there a way of knowing what oneI had to see if i can buy a replacement online? Is it written anywhere in the manual or something?
  11. BobM

    Fan on full blast when engine is cold?

    Yes i will definately do that. I willl give them a thourough going over tomroorw morning.
  12. BobM

    Fan on full blast when engine is cold?

    Thank you fingers crossed it stays ok. I will lift the boot and check the air intake incase something is loose ETC.
  13. BobM

    Fan on full blast when engine is cold?

    So i changed the battery today at halfords and then the engine management light came on. Fan still full blast but starting and driving fine. So i took it home and used my cheap obdII reader I have and it found three codes P0562 System voltage blow twice? And P2279 air intake system leak. I...
  14. BobM

    Fan on full blast when engine is cold?

    I woke up this morning and the car would not start. Was fine with a jump start so I think the battery m,ay be the issue. I will swap it out and let you guys know how it goes. Thanks again the the help.
  15. BobM

    Fan on full blast when engine is cold?

    Thanks for the replies guys. So what would be the next move? Is there a way of testing these and finding which one is the issue? cheers.
Top