Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Hi all , went to start the car this morning found a water leak it seems to be cracked on the hard plastic piece on this top hose this there an easy way to remove it or do you have to remove most of the front bumper to do it. Many thanks Tony
Thanks for replying Pedro , it's just the hose i need to remove. In the picture it's the part just by the kink to the right seems to be fixed back scuttle panel. left hand side is removed from the rad it's on a 200gt
Thanks Pedro, it's the hose that runs across the top of the scuttle left hand side drops down to the rad, right hand side is fixed with a jubilee clip to the hard plastic piece i can't remove
Yes that's the part (2) Pedro , it's part (71) the screw i need to remove .do I have to remove bumper or does the scuttle come of has a separate part to reach that screw. Thanks Tony
I'm sifting through some files to see if I can find a better angle it looks like 71 is a screw for the hose carrier which may be accessible according to the build diagrams below but I'm thinking that bolt/screw is removable from the inside top under the scuttle tray
Attachments
front bumper RCZ.jpg
8.8 KB · Views: 7
Schematic of the fornt build construction of the Peugeot RCZ.jpg