Code reader , Wouldn't Have clue where to put itCode reader to check if sensors are OK
BSI reset ?Not sure if a BSI reset would do it ?
Car is 5 years old and hardly used in the last few months so battery probably is a bit flat but would this really effect tyre pressure sensors ?The battery could be flat like the tyre I have heard that the battery only Last about six years and could well be the problem.. If the tyre is up to pressure then it more than likely to be this...
Sorry as you've probably guessed I'm not very mechanical savvyThe battery is in the sensor
To be honest I thought you could but there is no mention of it in the manualMy cars over 10 years old and all sensors still going strong, I thought you could reset the MK 2 tpms Via dash?
Yes looks like your sensor batteries are failing at 10 years old they’ve not done bad they're only supposed to last 5 years look online for replacements they’ll be expensive direct from Peugeot.My car is 10 years old. I also have problems with tire pressure. I checked the tire pressure and it was ok. But it sometimes tells me the front right is empty then the left front and again the back left and so this is repeated. The car also switches to safety mode and loses power. At the service I checked for faults on the machine. The computer showed no faults and everything was ok. I'm wondering if the faults will be fixed if I replace all four sensors in the tires? Or they can be empty batteries in sensors. Please help me
Fault images
Think I am going to do the same replace the valves with ordinary ones as one keeps alerting when its cold but not that coldYes its realy expensive. I reset my computer today so it no longer detects any sensors in my tires. I replaced the valves with ordinary ones and solved the problem