silicone hose thp270

[reycz95]

Hello.
I launched production of silicone hoses dedicated to R.
Two are already available, the one between air filter and turbo, and the descent to the intake manifold whose diameter has been slightly increased but above all now well rounded, for those with a 156 with forge kit it will be a plus, for 200 and 270 this removes the sound-system which restricts the passage of air.
test done on two thp200 there is a real gain at low speed, the air circulating better in a well rounded duct.
at the same time, I also have an aluminum hose no longer manufactured.
A large volume intercooler compatible 200 and 270 will arrive later via a different orifice plate.
To order, go to the link below (account creation required)
https://motorstore.fr/ventes-privees/fr/

 

[Marmite]

Great news there are so few parts available for the R unless you go to main dealer an be held to ransom for a pipe made of plastic

 

[reycz95]

this is what prompted me to have them manufactured, the R was shunned by the props

 

[reycz95]

it requires buying everything on occasion to be able to provide templates

 

[Marmite]

Front Discs next now that would handy or just the rotors an keep the original bell or is it not possible , there are very limited options out there

 

[reycz95]

Personally, I switched to tarox, and they are detailed, but I don't think the Alcon can be dismantled

 

[Marmite]

I will be in touch soon about a silicon I intake pipe I’m of the pick my drivers seat up it needed some stitching doing on the bolster it’s been a full on month , had the turbo of for a rebuild that’s all done an running great an that was down to the seal in the original pipe breaking up with age I would imagine so it has a temporary fix with a silicone joiner at the moment

 

[reycz95]

sorry the translation is confused

 

[reycz95]

the project is progressing well, in addition to the hoses already available, the intercooler has entered the design phase via 3D boxes

 

[RCZ-R]

the project is progressing well, in addition to the hoses already available, the intercooler has entered the design phase via 3D boxes

Congrats on doing this business! Providing parts for this extraordinary car is a bliss!

You should point out to R owners that the stock hoses connecting to the R intercooler are prone to falling apart on the inside. Due to ingress of engine oil into the surface on the inside of that hose it falls apart and can crumble into small plastic-like pieces which then fly around in the intake causing issues.
So those pipes would be the first one I would swap on my R.

 

[reycz95]

we do not have this info in France but I am writing it down. he remains until tonight to order them at launch prices

https://motorstore.fr/ventes-privees/fr/

 

[RCZ-R]

we do not have this info in France but I am writing it down. he remains until tonight to order them at launch prices

https://motorstore.fr/ventes-privees/fr/

Let me check, if I can find some pictures in my archive about that.

 

[Marmite]

I would like to get the intake pipe in silicone for my R if u can supply one

 

[reycz95]

Hello
no problem must go through the seller's site

Durite admission silicone PEUGEOT RCZ R 270cv - FLEXEO GROUP BUY

Durite de descente de turbo en silicone pour PEUGEOT RCZ-R 270cv

motorstore.fr

 

[Marmite]

Hello
no problem must go through the seller's site

Durite admission silicone PEUGEOT RCZ R 270cv - FLEXEO GROUP BUY

Durite de descente de turbo en silicone pour PEUGEOT RCZ-R 270cv

motorstore.fr

 

[Marmite]

Got this far an can’t get no further?

 

[Marmite]

Another question how do you remove the air intake pipe from the left hand side of the air box as it looks a pain to get at ?

 

[reycz95]

have you created an account?


the pipe on the flow meter side just loosen it, then the hose comes out relatively easily

 

[Marmite]

has it got a jubilee clip or like the inter cooler side a spring clip an yes I have created a account

 

[Marmite]

Congrats on doing this business! Providing parts for this extraordinary car is a bliss!

You should point out to R owners that the stock hoses connecting to the R intercooler are prone to falling apart on the inside. Due to ingress of engine oil into the surface on the inside of that hose it falls apart and can crumble into small plastic-like pieces which then fly around in the intake causing issues.
So those pipes would be the first one I would swap on my R.

I wonder if the pipe from the intercooler to the airflow meter suffers from the same issue as the air box to intake an breaks up inside as it does not recycle the engine omissions?