What's new
Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

Need help "engine mounts"

santi

New Member
Joined
Jun 17, 2020
Messages
9
Reaction score
2
Points
3
Location
madrid, spain
Hello people, first of all, I hope all of you stay safe.

Let's star,I going for a stage 4 in my Rcz,so this is the " route-map"

Stage 3 ( engine mounts)
  • Upgrade pistons and connecting rods. (here is my problem, the engine code for my car is EP6CDT and all the pistons and rods I found are for EP6DT or EP6DTS ) are all the same pistons for the engine?
Stage 4 (Turbo)
  • Upgrade turbo (Recomendation, Hybrid using a JCW or 207 RC internals? or Mambatek, Frankenturbo etc)
I need your opinion and if you know any good seller that placer orders to Spain please tell me.

Thanks
 

ONLY AEK

Active Member
Joined
Sep 4, 2014
Messages
518
Reaction score
46
Points
28
Location
greece
Why don't you buy an r's turbo?
It's bigger than jcw or 207
 

santi

New Member
Joined
Jun 17, 2020
Messages
9
Reaction score
2
Points
3
Location
madrid, spain
Because the "R" turbo is not plug and play, and here in Spain we have "ITV" similar to Uk "MOT" but is very dificult pass the test if you modded the car, for example if I install a big brake kit from brembo or similar or change the coilovers lowering the car we don't pass the ITV unless you get an enginiering that make a project for the car.
 

ONLY AEK

Active Member
Joined
Sep 4, 2014
Messages
518
Reaction score
46
Points
28
Location
greece
Then you should take a jcw
I have a hybrid turbo with 207 rc's shell and jcw's internals
With upgraded pistons and rods you should be able to output near 300 hp
 
Top