Abzynthe
New Member
Its just a philips isnt it? Thats what i used for mine :?
Peugeot RCZ Forum
Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Installing a K&N air filter
- Thread starter RCZ1
- Start date
A
Anonymous
Guest
Tried a phillips but doesn't work and I'm worried about damaging the screw head.
tianorth
Well-Known Member
Re: Installing a K&N air filter
Just been and looked at mine there are 4 posi drive bolts 1 on each side.
You can also use a flat bladed screwdriver if you must.
Just been and looked at mine there are 4 posi drive bolts 1 on each side.
You can also use a flat bladed screwdriver if you must.
A
Anonymous
Guest
Thanks for that but tried flat bladed as well but to chicken about putting to much force into it. Guess tomorrow I should just get grip and put some muscle into it.
Thanks again.
Thanks again.
RCZ1
Active Member
Re: Installing a K&N air filter
smitto, John said the screws maintain a degree of friction so they don't ever become completely loose whilst undoing them.
Push down hard on the screw driver and give a sharp turn to the left to break the initial grip of the plastic.
smitto, John said the screws maintain a degree of friction so they don't ever become completely loose whilst undoing them.
Push down hard on the screw driver and give a sharp turn to the left to break the initial grip of the plastic.
A
Anonymous
Guest
Thanks Kerry will try tomorrow
A
Anonymous
Guest
Thanks everybody. It was a no.2 Pozidrive £1.98 from b&q. Easy when you have the correct tool.