Hello everybody,
I just want to say thanks for sharing everything!
I have updated firmware and maps.
Everything went good except
North East Eastern Europe, where it restart after 1hour or so.
Same as in answer #100 from Plecodoras.
Then every time I started car I got a message
"Checking in progress" and then
"Please insert a navigation CD" or something like that.
I found out that memory for storing maps is full, but I didn't know how to
delete maps, because there is no such option on RT6 nav.
The solution is on this link:
RT6_FORMAT.CMD.txt
That is code you need to copy to mirascript.
I will write it here also if link goes down:
C:
/*
* RT6_FORMAT.CMD by mira308sw
*
* Format tool for Map disk /SDH
*
* v01.00 17/02/2015 : first release
*/
int ShowNavigationQuestionScreen ( char *txt, int *answ );
int ShowNavigationBargraph ( void );
int StepBargraph ( char *txt, int per );
int Format ( char *drive );
int main ( int argc,char *argv[] )
{
int answ;
ShowNavigationQuestionScreen( "Format maps disk /SDH ?",&answ );
if( answ==1 )
{
ShowNavigationBargraph();
StepBargraph( "format in progress...",50 );
if( Format( "/SDH" )==0 )
ShowNavigationQuestionScreen( "Format Complete!",&answ );
else
ShowNavigationQuestionScreen( "Errors in Format /SDH",&answ );
}
return 0;
}
I have done this by editing code used for Deactivation of activation code.
I have opened folder "Deactivation_of_activation_code", then folder "CMD" and then opened RT6_SETTING file with text editor.
You just need to delete whole code and copy the code from above. Also I have renamed the file RT6_SETTING to RT6_FORMAT, but that is not necessary.
Then, delete "System Volume Information" hidden folder from USB stick and copy everything from "Deactivation_of_activation_code" to USB stick.
After completing this, you can put USB stick into car and start the engine and after few minutes you will be prompted to format maps disk, just choose yes and thats it. Deleting is fast, I think less than a minute. After formating I was prompted to restart system and I have answered yes, but nothing happened. I have turned the engine off, removed USB stick and turned it on again and the maps were deleted.
After this I have successfully installed the maps that I needed.
I hope that this will help somebody with the same problem as mine.