Abzynthe
New Member
Hello again. :greetings-wavingblue:
Welcome to another of Abz's how tos. Today I will talk you through changing the bulbs in your map light.
All you will need is a smallish flat head screwdriver and the replacement bulbs (See below for my recommendation).
Step one:
The only thing you need to remove is the clear cover, not the whole unit, like some older Peugeots require. All you need to do it lever it off with the screwdriver. The best place is on either the left or right as there is a little recess in the lense to get your screwdriver in.
Step two:
You will need to remove the bulbs. As I have quite fat fingers, it was quite difficult for me, so I used the screwdriver to get them out.
These are the bulbs that should be in there.
I recommend these bulbs as a suitable replacement.
http://shop.rczperformance.com/product.sc?productId=22
Or
http://www.topled.fr/Leds_auto_moto/Pla ... index.html
Put your new bulbs in and put the lense back on. And thats it
The bulbs I recommended have smds on both sides and one at the top. The ones I have are only one sided, so I have only put them in the side ones.
Welcome to another of Abz's how tos. Today I will talk you through changing the bulbs in your map light.
All you will need is a smallish flat head screwdriver and the replacement bulbs (See below for my recommendation).
Step one:
The only thing you need to remove is the clear cover, not the whole unit, like some older Peugeots require. All you need to do it lever it off with the screwdriver. The best place is on either the left or right as there is a little recess in the lense to get your screwdriver in.
Step two:
You will need to remove the bulbs. As I have quite fat fingers, it was quite difficult for me, so I used the screwdriver to get them out.
These are the bulbs that should be in there.
I recommend these bulbs as a suitable replacement.
http://shop.rczperformance.com/product.sc?productId=22
Or
http://www.topled.fr/Leds_auto_moto/Pla ... index.html
Put your new bulbs in and put the lense back on. And thats it
The bulbs I recommended have smds on both sides and one at the top. The ones I have are only one sided, so I have only put them in the side ones.