What's new
Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

driver side window

rob1robno1

Member
Joined
Jun 12, 2017
Messages
50
Reaction score
0
Points
6
hi guys..i just replaced the driver side electric window motor and everything works ok with the door open..but the minute I close the door the window opens half way..if I sit in the car and hold the button up the window will go up to the top but then go straight down to half way again..window works fine with the door open...car getting on my nerves now..any ideas guys.. ( I also disconnected the battery for half hour but the minute I connect it back up the window opens again to half way)
 

neilgsxr69

Moderator
Staff member
Joined
May 7, 2014
Messages
3,214
Reaction score
722
Points
113
Strange one that :eusa-think: possibly needs a reset I’m sure there is a step by step guide to BSI reset on the forum do a search for it and that will hopefully solve it :eusa-think:
 

RCZIain

Moderator
Staff member
Joined
Apr 26, 2017
Messages
1,297
Reaction score
165
Points
63
Location
Lincolnshire
Try holding the window switch up till you hear a small click, then down till you hear the click.
Usually hold it for a few seconds but you should hear a quiet click.
 

DKZ5745

Well-Known Member
Joined
Sep 7, 2014
Messages
5,094
Reaction score
562
Points
113
Location
Yorkshire
If that doesn’t work, the procedure for a BSI reset is :-

Put the driver’s window down, lift the bonnet and ensure all
equipment is switched off.
Ensure all doors are closed and remove key from the
ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait
15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do
not open doors.)
Switch on the side lights through the driver's window.
Switch on the ignition and check system’s functionality.
Hold lock button on key down for 10 seconds.
remove key open & close door test central locking system
Start the engine and complete the system’s check.
Failure to follow this procedure could result in incorrect operation of many
BSI related items.

If either of the above solutions work, don’t forget to let us know so it might help others with your problem in the future.
 

Verminator

Moderator
Staff member
Joined
May 29, 2018
Messages
1,849
Reaction score
897
Points
113
Location
North Yorkshire
I have had the same problem with the wife's RCZ and it turns out it was down to the window regulator changed it and all OK after that
 

MJZ

Member
Joined
Oct 6, 2021
Messages
40
Reaction score
13
Points
8
Location
France
Hi V…can you tell me what the window regulator looks like, where can I get one or see one and how easy is it to change it…much appreciate some info…many thanks….
 
Top