Search results

Here you go.....

I had a look at ServiceBox..... At the very least the Rocker cover needs to come off, Maybe lots more. There is a part number for it, but as Neil has stated - its most likely to be part of a kit and not a simple job.

Good news that its a quick fix. I bet a replacement pipe would cost a fortune.

I have always added a tube of Molyslip to a gearbox whenever I acquired a new car or changed the Gearbox oil. Best £10 ever spent.

I like those stripes.....

Just adding to OkeyStokey's post, The following instructions are shown in ServiceBox for removing the boot switch/button.... Pic 1 - Remove the cover (1) ; Using tool [1350-ZZ]. Pic 2 - Remove : The switch (3) ; Using tool [1350-ZZ] The springs (2) Pic 3 - Unclip : The boot opening control...

Looks like the light unit is just pushed in and held in place by clips. ..as the bumper is made of plastic, there will be at least 2 wires, negative and a feed from the lighting circuit. The camera (unless its a wireless camera) will probably have a phono connection, and this will need to go...

I'm 6' 1". Headroom is not an issue but with longer legs I needed to raise the front of the drivers seat, I put a 30mm spacer under each of the front seat mounting bolts, It works fine.

No experience of this product, but some questions you may want to ask.... Will the Parking sensors still work with this? Will the Steering column switch still work? Have a good search through this forum for "double din", Many of us have installed aftermarket units, with varying levels of...

I wouldn't mind seeing some pictures of the wrap, I'm getting the wheels on my Opal White RCZ refurbished (and painted black) and was thinking about getting the arches painted (or wrapped) as well.

Does this help....

...I'm still living in the past. I have someone walking in front with a red flag whenever I go out.

I'm sure that on some old Peugeot's (eg. my old 406 Coupe) the fuse that protected the Radio had 2 positions, One of which allowed the Radio to remain on, F23 in this example. I've not had a proper look at the RCZ fuse box - Might be worth a look.

I fitted a Kenwood DDX4016DAB to mine. Needed quite a few extras. New dashboard insert (this had resized buttons/controls above the existing radio). Stalk control adaptor, DAB aerial (screen mounted) , a buzzer replacement device to allow the parking sensors to work. I also fitted a reversing...

It might be worth checking the oil level in the auto gearbox. I'm no expert but I think oil issues in auto boxes causes no end of problems if not correct.

Like he said !!!

My Cousins friend's second wife's Gynecologist said its ok to drive at 90mph on public roads because everyone is staying at home with Coronavirus. It says so on Twitter so it must be true.

Be careful about "piggy-backing" . I would image your Sub will draw a lot of power - and at 12V that means a high current (200W at 12V is over 15 amps). That sort of current will cause a thin wire to heat up. Try and wire it back to the battery, or better still - get the installer to put a wire...

Its not unusual to find an "empty" plug or socket - The wiring loom is standard throughout the range, including the wiring for features that are not present in your version of the RCZ. The "non-starting" comment needs a bit more details, does the engine turn over but not fire - Is the battery...

"horrible crunching noise " Sounds like the teeth have been stripped. Take off the door card and have a good look. Ebay may be a good supplier - I'm sure many Peugeot models use the same window winder components