Peugeot RCZ Forum
Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Latest activity
-
JHi all. I know this has been covered numerous times on here as it seems to be a common thing. Anyway i have just purchased my car this...
-
JJvdBosch replied to the thread Jacking Points.I used a drill and chisel. The rubber is very easy to cut. The circular hole on the back was the hardest. I drilled out the shape and...
-
rorymonsta replied to the thread Jacking Points.Once you have done your one could you post your plan with dimensions etc. I've got one bent jacking point and want to preserve the... -
OBLIVXIONN replied to the thread Tony Banks Exhaust.Oh nice! What sort of set up did you get from Tony? As in did you get a back box delete, resonated or not, etc? I decided to go with... -
….and I cry at the price of brembo for a 156. -
LThe 156 is far more nifty than its counterparts I service one of these & when they get new plugs coil packs & clean oil they go very...
-
The 156 is far more nifty than its counterparts I service one of these & when they get new plugs coil packs & clean oil they go very... -
EddieJ replied to the thread Vanos failure.Unfortunately seen that before on a 1.6 thp 150 (not a Z) foam builds up, sometimes gets through the system but instead of oil working...
-
JThe 156 is far more nifty than its counterparts I service one of these & when they get new plugs coil packs & clean oil they go very...
-
KKMG replied to the thread Jacking Points.Ok, thanks for your help. I'll update when I've made my blocks. At least they should save those pesky jacking points from getting...
-
JJvdBosch replied to the thread Jacking Points.I’ve got one with a 85mm low point indeed. When you remove the puck, it just about fits. So that’s why I cut the circular profile in the...
-
KKMG replied to the thread Jacking Points.Thanks for the info. I bought two blocks, as I didn't realise you'd cut one in half. I guess I'll have a spare! The only thing puzzeling...
-
JJvdBosch replied to the thread Jacking Points.looking at it again, I see I saw the block in half. So my lifting block is 60mm wide, 80mm high at the highest point and 160mm long.
-
-
JJvdBosch replied to the thread Jacking Points.80mm is perfect for the width, no need to change. So just transfer your profile and use a bandsaw to cut it. The jacking point has a...
-
