What's new
Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

Turn signal sound level

JvdBosch

Member
Joined
Aug 23, 2014
Messages
71
Reaction score
4
Points
8
Location
Eindhoven
I know I have a small hearing deficiency on one ear, and I know the R makes more noise than a standard RCZ, but do any of you also experience difficulty to hear the turn signals bips? It has happened to me more than once that I find the signal on, because I pushed it too far or because I just blatantly forget (because of the lack of auditory or visual feedback)...
The lights on the dash are placed too high, so my steering wheel obscures those...

Any possible solutions for this issue? Any hidden software settings?
 

2retro

Well-Known Member
Joined
Feb 5, 2015
Messages
1,884
Reaction score
312
Points
83
It's rare I ever heard the indicator clicking away as I've usually got music on anyway. Pretty sure I wouldn't want some super loud tick tock sound inside the car every time I indicate either.

Just check the indicator stalk is back in the correct position by hand after turning if you're worried it's not cancelled.
 

DKZ5745

Well-Known Member
Joined
Sep 7, 2014
Messages
5,115
Reaction score
586
Points
113
Location
Yorkshire
It is possible to adjust the sound level for the front & rear parking sensor beeps using Mirascript I don't know if the indicator volume can be adjusted in the same way?
I don't think I have ever seen this, maybe someone has done this using Mirascript and can advise further. :eusa-think:
 

JvdBosch

Member
Joined
Aug 23, 2014
Messages
71
Reaction score
4
Points
8
Location
Eindhoven
2retro said:
Just check the indicator stalk is back in the correct position by hand after turning if you're worried it's not cancelled.

Yeah, but when trying this, it's very easy to trip the three-signal switch... Just a louder sound would be nice. The manual states the sound will get louder when driving over 50mph (or something like that) and after 20 seconds of continuous blinking, but I'd like the sound to always be loud...
 

ONLY AEK

Active Member
Joined
Sep 4, 2014
Messages
518
Reaction score
46
Points
28
Location
greece
I like the sound not to be loud

What can we do? No way everyone to be happy with everything
Just move the steering so you can See the lights
 

JvdBosch

Member
Joined
Aug 23, 2014
Messages
71
Reaction score
4
Points
8
Location
Eindhoven
ONLY AEK said:
Just move the steering so you can See the lights
It's already pretty high... I'm a tall guy and I like an upright driving position. Almost all cars I've ever driven have this problem one way or the other... But I'll check.

Apparently on other pugs the sound originates from a very small speaker in the steering column. Maybe that can be changed. Anybody have some schematics on this topic to check if the RCZ has a similar setup?
 

drdino

Member
Joined
Apr 27, 2014
Messages
145
Reaction score
2
Points
16
Yeah, there's a small speaker on the COM unit (the black steering column control module that the stalks attach to).
 
Top