Fault code

[Goose]

tried changing both cam position sensors, still get this intermittent fault code, any ideas welcome
Thanks

 

[Pedro]

This fault can be related to oil issues maybe try Oil change?

 

[Goose]

This fault can be related to oil issues maybe try Oil change?

Thanks Pedro, l will give it a try

 

[Goose]

Thanks Pedro, l will give it a try

Hi mate, near j21 m6

 

[turboguy]

I had the same code recently so changed the oil and filter and its gone away, even though last oil change was less than 4k ago

 

[Marmite]

I had this same issue an it turned out to be the vanos Solenoid was to blame it had come loose in its casing causing it intermittently to trigger the engine management light it’s a easy fix .

 

[Goose]

Thanks guys, l will check these out

 

[Pedro]

Hi mate, near j21 m6

J10 off the M56

 

[Goose]

J10 off the M56

Rv sometime ?

 

[Pedro]

Rv sometime ?

yea sure but bit busy at the mo were gutting one my son's houses but if you need any advice post up or pm me

 

[Goose]

Thanks dude, good luck with the renovations

 

[Goose]

I had this same issue an it turned out to be the vanos Solenoid was to blame it had come loose in its casing causing it intermittently to trigger the engine management light it’s a easy fix .

Thanks Marmite, I'll be fitting a new one soon

 

[Goose]

Thanks for your help guys, l took out the easy one at the front and cleaned it with air flow meter cleaner, made sure the piston was free then refit. Fingers crossed, seems ok so far

 

[Marmite]

The one at the front relates to cam shaft B the back one is A