A
Anonymous
Guest
I've got to change the coolant level sensor on the girlfriends RCZ 156. Has anyone done this themselves before? Is it easy enough to do? Do i have to drain some coolant out of the expansion tank?
Peugeot RCZ Forum
Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
A
Anonymous
Guest
Changed this yesterday and it was very easy to do.
I used a pump to remove some of the coolant from the expansion tank (to below the level of the sensor)
Removed the electrical connector to the sensor.
Removed the sensor by twisting it 90 degrees and then pulling it out.
Fitted the new sensor using the same method reversed.
So far we haven't had the coolant level warning message come up since so fingers crossed!
I used a pump to remove some of the coolant from the expansion tank (to below the level of the sensor)
Removed the electrical connector to the sensor.
Removed the sensor by twisting it 90 degrees and then pulling it out.
Fitted the new sensor using the same method reversed.
So far we haven't had the coolant level warning message come up since so fingers crossed!
tianorth
Well-Known Member
Any chance of any photos to show location etc?
Just in case anyone else wants to do this and finds this thread.
Just in case anyone else wants to do this and finds this thread.