A
Anonymous
Guest
Hello all,
I recently purchased a RCZ HDI (2010) with Navigation + Bluetooth (WIP Com 3D). The problem I found is the following: connecting a phone with bluetooth the audio is correctly amplified while the called party hears nothing (as if it was dumb).
This problem happens with any phone (I tried with Sony Ericsson, Motorola, Nokia and Huawei) and is not solved even by the firmware upgrade from R23.21 to R42.01.
Any suggestions?
Note: if I disconnect the fuse that turns on / off the system board (fuse yellow), the first call works correctly (feel and hear me via bluetooth) while from the second call the problem becomes systematic again (and turning on and off the engine does not solve it).
Thank you again for any support,
Antonio
I recently purchased a RCZ HDI (2010) with Navigation + Bluetooth (WIP Com 3D). The problem I found is the following: connecting a phone with bluetooth the audio is correctly amplified while the called party hears nothing (as if it was dumb).
This problem happens with any phone (I tried with Sony Ericsson, Motorola, Nokia and Huawei) and is not solved even by the firmware upgrade from R23.21 to R42.01.
Any suggestions?
Note: if I disconnect the fuse that turns on / off the system board (fuse yellow), the first call works correctly (feel and hear me via bluetooth) while from the second call the problem becomes systematic again (and turning on and off the engine does not solve it).
Thank you again for any support,
Antonio