So mechanic changed now brand new blower motor and at same time new blower motor resistor/regulator and yet won’t blow any air, what the h*ll could be the problem here? Fuses and wires were OK so mechanic suggested perhaps ac control panel etc is the problem, but it still works like it should, it has lights and I can hear when using it, it makes some adjustments aka it gives correctly those commands for whole AC to work but just somehow blower won’t turn at all…
And so whenever I turn the engine on and it turns on AC, i can see those small 2 dots ”flashing” on each temperature screen on their left corner of those screens and then after some seconds they always dissappear?
If anyone can suggest anything that I could try at home to fix this, I would appreciate it a lot! I already tried BSI reset but didn’t work.
And so whenever I turn the engine on and it turns on AC, i can see those small 2 dots ”flashing” on each temperature screen on their left corner of those screens and then after some seconds they always dissappear?
If anyone can suggest anything that I could try at home to fix this, I would appreciate it a lot! I already tried BSI reset but didn’t work.