How to replace the battery.

[hsv]

How to replace the battery.
I have bought the service manual, but there is nothing about battery.
Also the virtual PC there can be downloaded from this site, has no information about this.

 

[Verminator]

Have you looked on YouTube... For it RCZ or 308 battery replacement

 

[2retro]

Have fun taking half of the engine bay out!

 

[neilgsxr69]

20mins tops when you’ve done it once main thing is to make sure you let all the electrical systems shut down first before you disconnect the battery 5minutes should be enough

 

[Marmite]

20mins tops when you’ve done it once main thing is to make sure you let all the electrical systems shut down first before you disconnect the battery 5minutes should be enough

Unless you got a brain like a sieveI changed mine last year but I cannot remember how I did it , all I know is there. Was a heap of bits on the floor

 

[indoldn]

How to replace the battery.
I have bought the service manual, but there is nothing about battery.
Also the virtual PC there can be downloaded from this site, has no information about this.

I found this youtube video

to be very useful. As mentioned above make sure you let all the electrical systems shut down first before you disconnect the battery.

 

[hsv]

Hi
Yes I found the suggested video, but there are details not mention.
There is also another video Peugeot RCZ R battery replacement - YouTube
This has also been usefuld Vymena akumulatora Peugeot 3008 - YouTube


But thanks for the suggestions about shuting down the electrical system.

 

[rczpali]

Shutting down - does this mean leaving car 5 mins after switching off engine before disconnecting ?

 

[lfe]

I found this youtube video

to be very useful. As mentioned above make sure you let all the electrical systems shut down first before you disconnect the battery.

The video contains serious errors, such as disconnecting cables without first disconnecting the battery! Significant risk of short circuit!

The first step is to open the small cover and disconnect the positive (+) terminal of the battery.

There's no need to disconnect any cables or connectors. The fuse box is released from its clips and pulled to the right, this will allow the battery to come out.

The large battery cover tilts backward and then can be removed. Do not attempt to lift it or pull it forward without first tilting it backward.