N/S back light not working

[moe]

Has anybody had this problem LED working fine so is the indicator and the brake light which is a double fillent bulb with the side light which has suddenly decided not to work. i have obviously changed the bulb but still no joy. Any ideas?

 

[Pedro]

Check fuses & if you replaced with a Led bulb is it compatible with the Canbus system?

 

[moe]

it wasn't a LED bulb. Would there be a separate fuse for the side light on the N/S only which is the only light not working?

 

[Verminator]

Well on the 307 if one back light is not working and the bulb is good it was down to one of the number plate light bulbs which have blown and this needed to be replaced and hay presto all lights back on... Hope this helps you out
Drive safe and stay lucky
Les n Co

 

[Pedro]

it wasn't a LED bulb. Would there be a separate fuse for the side light on the N/S only which is the only light not working?

Usually if you drop a loop (circuit failure ) a fuse could be part of the problem checking fuses for no power in a loop is common practice but it could easily be the actual bulb holder itself which may be the root cause ?

 

[Verminator]

I have seen many 307cc with one back light out and bulbs OK and down to the number plate bulb