Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!
Did you get to the bottom of this?……
I’ve had this problem for nearly a year I’ve had new top mounts drop links ball joints track rod ends….still the same:mad:
im now thinking it might be an engine mounting…even though they look ok I’ve heard the rubber can dry out and cause knocking...
Hi guys…..
Ok as above heading knocking noise from front passenger side sounds like ball joint drop link etc….but I’ve had these all changed along with suspension top plates and track rods….
Any you guys had similar issues?….Ive read past comments that engine mounts can dry out on the rubber...
The sensor I put a photo up of is just a link off eBay….Some of the cheap ones have poor reliability issues…
Regarding sensors I tend to go with main dealer or Febi products etc….
I changed mine roughly 3 months ago and didn’t do any of the 3min rule and had no problems since….
The circuit board thingy on the edge of the battery was a sod to get off but bit of persistent wedging up with screwdriver got it loose …..(y)
Mine gets warm but only after driving roughly 20mins ( My old Renault megane is warm after 5mins )…..
Going by past forums the Matrix is not the best on them maybe a new one will sort it and follow Pedros advice on bleeding the system the right way….
🤞
From what I remember you can move the black box out of the way…and yep its still tight in there
I put uprated led in mine the lights are the brightest I’ve come across….they seem to pass mot every year with no problems even though I’m told they illegal…
When fitting you basically blind doing it...
I took the gamble on mine and bought a cheap one on eBay as my old one like yours had split on turbo connector…..
Came in at roughly £26 fitted perfect but the breather hose on the right was a bit of a stretch….but fitted with no issues (y)
Same I have on mine…I’ve also fitted led bulbs on the main beam instead of the halogen….
The lights on main beam are incredible…
plus I swapped the standard hid bulbs on dipped to Winpower from Amazon worth while upgrade….(y)
I had same problem with mine I was told to only go for genuine Peugeot sensor….and I still get the warning message…
Ive had my Rcz a few years now as much as I love the car…I’ve never seen no other cars with as many warning messages….😫
As above heading guys aircon is freezing for short while then goes warm then back cold..?...
The photo I can't tell if the pump clutch is engaged or not?...I've got a aircon gauge here and reading shows it's got pressure in there...When you guys press the aircon button can you hear it kicking in?...
I had same problem with my catch as they are flimsy but I managed to get the catch to work again and spray loads of wd40 etc over bonnet lock mechanism etc and been fine since….thank god..