RacingSnake
New Member
I've read through Tia's upgrade thread a few times and completed the downloads. I've had a go with a burned CD for the firmware update (system could not read my standard CD-R burned and 'closed' with the correct files on). Yesterday I tried with 2 x USB sticks, one with the 2_86 files and one with the 2_80 files just in case. Neither worked but the 2_80 at least attempted to check the media contents on the stick before declaring something was missing or damaged in the data.
.
The info I get from my installed system is:
Unit ref: 980703977
CD no: 8639
SW Version-unit: RNEG2.75.C.5 (then for each hit of the central control button this changes as follows..)
201212051200
CD:8639
BR: 6.2:7010r
CD_FW:35
FP:06.01.d1
GSM:---
AVR DB:0
GPS:GSW2xr-
RD:RMM
Grpo4:61
dbdwnl:313
BT:5.20.1
72d8h57
HDD 0d0h0
Not sure what to try next other than a main dealer resolution The downloads are definitely correct but the system won't pick them up. When using my satnav it has a habit of navigating fine for a while then just 'freezing' on the current map view.
.
The info I get from my installed system is:
Unit ref: 980703977
CD no: 8639
SW Version-unit: RNEG2.75.C.5 (then for each hit of the central control button this changes as follows..)
201212051200
CD:8639
BR: 6.2:7010r
CD_FW:35
FP:06.01.d1
GSM:---
AVR DB:0
GPS:GSW2xr-
RD:RMM
Grpo4:61
dbdwnl:313
BT:5.20.1
72d8h57
HDD 0d0h0
Not sure what to try next other than a main dealer resolution The downloads are definitely correct but the system won't pick them up. When using my satnav it has a habit of navigating fine for a while then just 'freezing' on the current map view.