THP 200 Turbo intake pipe

[RCZ GT200]

Has anyone fitted an aftermarket turbo intake pipe to their THP200? Mine has split where it goes onto turbo.
I’ve seen lots of them available as aftermarket with numbers such as 1440Q6 and 1440s4 but I have no idea if these will fit or what the differences between them are.
Also, some seem to have a valve in the breather hose where the electrical plug goes on. Mine doesn’t have one fitted in the current hose. Should it have one?
Any advice greatly appreciated.

 

[rorymonsta]

I realise this is very late. But from the looks of it the 1440S4 is the most like the pipe on the 200, the other has a longer looking breather hose that might be for the 156. I have not tried one of them as mine is still ok. Some people go the mtc or forge route but if you did try a stock for stock replacement it would be good to know how it goes

 

[Mikefrank]

I took the gamble on mine and bought a cheap one on eBay as my old one like yours had split on turbo connector…..
Came in at roughly £26 fitted perfect but the breather hose on the right was a bit of a stretch….but fitted with no issues