Part Number Requests

[Abzynthe]

I thought Id make a thread for people to request part numbers, and also use this first post to put previously requested part numbers.
I know everybody can get access to service box, but it can be difficult to navigate. Anyone can request a part number or answer a request.

When making a request, please state the year of your car and engine.

P.S. If anyone has any prices when ordering these items, please also let us know

Pre Facelift:
Badges:
Asphalt Badge:
Left: 16 073 688 80
Right: 16 073 689 80


Facelift:
DRL units:
Left: 16 096 677 80
Right: 16 096 678 80


R:
Badges:
Rear R Badge: 98 076 937 80
Front R badge: 98 076 936 80

Gear Knob: 96738472XJ
Rear spoiler: 9807335080

All Models:

Rear Fog/Reverse light surround: 7453 36

 

[Anonymous]

Part needed. Rear Valance housing

Seems i have loose bit of trim

The housing around the bottom rear light on the rear valance has come loose and looks to have broken off.

Does anyone hate the part number for this?

 

[Abzynthe]

Re: Part needed. Rear Valance housing

Ive set up a part number request thread

Ill have a look If I can get on SB at work

 

[Abzynthe]

Re: Part needed. Rear Valance housing

The part number is: 7453 36

 

[Anonymous]

Re: Part needed. Rear Valance housing

Cheers bud

 

[Abzynthe]

Re: Part needed. Rear Valance housing

No worries.
Im going to merge this with my part number thread

 

[Anonymous]

Re: Part needed. Rear Valance housing

Seems i have loose bit of trim

The housing around the bottom rear light on the rear valance has come loose and looks to have broken off.

Does anyone hate the part number for this?

Yep, I seriously hate it, with a vengeance :lol:

 

[Abzynthe]

:lol: Good spot. As an auditor I should have seen that

 

[Anonymous]

hello, dear friends,

who could help us get the connecting rods part number and connecting rods bearing part number,

if could tell the detailed sizes of bearing tag ( please check the picture) , that would be great,

 

[s0crates]

Need this part number please, 1.6-litre THP200 2010

Edit: Got it, 1440s4. Decided to get a replacement from forge motorsport

 

[John5247]

Hello and Happy New Year. My drivers window regulator has derailed its steel wire - again!
Has anyone come across a replacement from Puegeot or another make. Pretty sure this is not unique to RCZ.
I'm convinced a part from another model will fit, but once the RCZ label goes on up goes the price.
A regulator for a 308 is £30, but for an RCZ it is £300 !
Does anyone know the actual French part number of the regulator mech? I have googled all the numbers off the motor with
no joy.
In case anyone else is in this situation there's a guy on ebay will refurb the regulator for £59, but you have to send hime the old
mechanism.
Many thanks in advance

John

Manchester UK

 

[lfe]

https://www.euspares.co.uk/parts-catalog/electric-window-winder-12791/peugeot/rcz

 

[Pedro]

Part needed. Rear Valance housing

Seems i have loose bit of trim

The housing around the bottom rear light on the rear valance has come loose and looks to have broken off.

Does anyone hate the part number for this?

Found out mine was cracked when I bought the car had to get it through dealers

 

[lfe]

Part numbers for MK1 RCZ

 

[newkiebrown]

I am looking for the throttle body number for a THP 200 RCZ 2015 plate.

I think I have found one on AutoDoc which seems cheaper than looking on other sites by a few quid but when I put my reg in it comes up with my car as a 270 which it isn't, so I then change it to the make, model of my car etc.
My reg is - FM15 ATF

Also, I am pretty sure my car is the 147KW model rather than 150KW model but how would I know for sure? The manual that came with the car just states 200HP

https://www.autodoc.co.uk/vdo/1737059

Siemens VDO | Euro Car Parts

Siemens VDO at the lowest UK prices from Euro Car Parts UK’s No.1 for Car Accessories, Car Styling & Car Care. Buy today Online, In store or by Phone + Branches Nationwide – Next Day UK Free Delivery.

www.eurocarparts.com

They have between 57mm and 60mm diameter. The VDO make one, seems to be £205 on here but £440 on EuroCarParts which leads me to believe I am looking at different items? But I can't see any difference between them.

Lastly does the make of these really make a difference? With the exception of the materials between presumably ABS or Aluminium?

 

[travelswithanrcz]

Anyone got a part number for the high pressure fuel rail for an RCZ 200 MK1? Thanks