What's new
Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

How to Remove/Replace Window

Mr Z

Member
Joined
Jan 8, 2020
Messages
30
Reaction score
5
Points
8
Location
uk
Mr Z, my advice sounded a bit confusing, I assume that is the drivers door in the picture?
so you have removed the bolt which you need to do, then on the rear of that bracket which you can’t see, moulded into the white plastic is a 5 pence piece sized indent which you prise away from the glass whilst lifting the glass out of the door, dont forget the front bracket just clamps the glass, another 10mm bolt
Just want to thank you for your help. Got the window out and regulator sent away for repair.

Thanks again
 

Giraffehouse

New Member
Joined
Mar 3, 2023
Messages
1
Reaction score
0
Points
1
Location
UK
hi, one of the clips, the one nearest the door handle is held on with a plastic clip, from behind, you need to carefully prise it away from the glass with your fingers or a plastic trim tool and lift the glass out, the 10mm bolt goes through the glass(there is a hole in the glass).
it will make sense when you see it, there is a guy on eBay who repairs the regulator, excellent service, I’ve used him a few times
My passenger side window is stuck immovable two inches from the top - currently gaffered shut. It's either a broken wire of a new motor or regulator needed. Before attempting this repair, two questions:
1) Assuming I need to remove the glass to change the regulator or motor, if the window is immovable, am I going to be able to get the bolt that goes through the window out, as I note you have to move it to a particular position before removing it? Can the window be moved without the motor working?
2) You mention an eBay repairer. Any chance you could drop a link?

Thanks muchly
Dd
 

Verminator

Moderator
Staff member
Joined
May 29, 2018
Messages
1,770
Reaction score
869
Points
113
Location
North Yorkshire
If you take off the tape and tum the power off with the keys out remove the switch and unplug the wire block then plug it back in. Then put key back in and tum on power with the doors closed reach over to see if switch working.. If this doesn't work try the same to drivers door if nothing happens it's down to the regulator
 
Top