What's new
Peugeot RCZ Forum

Register a free account today to become a member. It's free! Once signed in, you'll be able to participate on this site by adding your own topics and posts, connect with other members through your own private inbox and take part in competitions!

Codes and problem with acceleration (jerking)

Blantche

New Member
Joined
Oct 30, 2022
Messages
16
Reaction score
0
Points
1
Location
Poland
Hello,

At the start, sorry for my English, but it's not my native language.

I have problem with acceleration with my Peugeot RCZ THP 1.6 200. Car work properly when I drive normally, but when I accelerate dynamic (often when I accelerate up the hill) the engine jerks and get error then engine loses revs and I need to stop the car, wait about 10 minutes then I can drive again.

After error, second coil stop working (before error show ups works properly)

I changed all the filters, oil for 0W-30, smart plugs, water pump sprocket tensioner.

My mechanic said that the turbocharger needs to be replaced because it is slightly leaking.

Codes:
P1336/P1338 - I hope changing the second coil will fix this problem (i ordered and waiting for arrival)
P0948 - I read the forum before and some people said that can be a problem with oil pressure sensor or oil pump solenoid valve. Which one, do you think?
 

Attachments

  • 321135003_650749940133635_3863501776108245352_n.jpg
    321135003_650749940133635_3863501776108245352_n.jpg
    58.5 KB · Views: 12

Pedro

Well-Known Member
Joined
Jan 16, 2020
Messages
2,561
Reaction score
801
Points
113
Location
Cheshire
P0948 relates to Hydraulic pump relay circuit too high
P1336/1338 cam & crank sensor bank 1- misfire or multiple misfires coil or plug issues might be the cause loss of power
 

Blantche

New Member
Joined
Oct 30, 2022
Messages
16
Reaction score
0
Points
1
Location
Poland
I read the codes, but don't know what the P0948 means. What check first, oil pressure sensor or oil pump solenoid valve?
 

Pedro

Well-Known Member
Joined
Jan 16, 2020
Messages
2,561
Reaction score
801
Points
113
Location
Cheshire
Search for the posts from Valex he had similar issues I think he changed the solenoid valve if I remember rightly but P0948 could mean the solenoid is going to fail?
 
Top